<div class="cmTitle">Material Grade S355J2H Specification</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th>Standard</th>
			<td>AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe</td>
		</tr>
		<tr>
			<th>S355j2h En 10210 Hollow Section Seamless Pipe Size</th>
			<td>4 to 219mm W. T.: 0.5 to 20mm</td>
		</tr>
		<tr>
			<th>En 10210 S355j2h Steel Welded Pipe Size</th>
			<td>5.0 mm &ndash; 1219.2 mm</td>
		</tr>
		<tr>
			<th>Carbon Steel S355J2H EFW Pipe size</th>
			<td>5.0 mm &ndash; 1219.2 mm</td>
		</tr>
		<tr>
			<th>EN 10210-1 Grade S355J2H Tube Swg &amp; Bwg</th>
			<td>10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.</td>
		</tr>
		<tr>
			<th>EN 10210-1 Grade S355J2H Carbon Steel Pipe Schedule</th>
			<td>SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS</td>
		</tr>
		<tr>
			<th>Carbon Steel S355j2h En 10210 Seamless Tube Size</th>
			<td>3.35 mm OD To 101.6 mm OD</td>
		</tr>
		<tr>
			<th>EN 10210-1 Grade S355J2H Welded Tube Size</th>
			<td>6.35 mm OD To 152 mm OD</td>
		</tr>
		<tr>
			<th>En 10210 S355j2h Swg &amp; Bwg</th>
			<td>10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.</td>
		</tr>
		<tr>
			<th>En10210 S355j2h Circular Hollow Tube&nbsp;wall thickness</th>
			<td>0.020&quot; &ndash;0.220&quot;, (special wall thicknesses available)</td>
		</tr>
		<tr>
			<th>En 10210 S355j2h Hot Rolled Length</th>
			<td>Single Random, Double Random, Standard &amp; Cut length Pipe &amp; Tube</td>
		</tr>
		<tr>
			<th>En 10210 Grade S355j2h Finish</th>
			<td>Polished, AP (Annealed &amp; Pickled), BA (Bright &amp; Annealed), MF</td>
		</tr>
		<tr>
			<th>Bs En 10210 S355j2h Form</th>
			<td>Round, Hydraulic, &lsquo;U&rsquo; bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc</td>
		</tr>
		<tr>
			<th>En 10210 S355j2h Steel Type</th>
			<td>Welded, Seamless, ERW, EFW, Fabricated Pipe, &lsquo;U&rsquo; bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc</td>
		</tr>
		<tr>
			<th>En 10210 S355j2h Hot Rolling End</th>
			<td>Plain End, Beveled End, Treaded Pipe &amp; Tube</td>
		</tr>
		<tr>
			<th>S355j2h En 10210 Hollow Section Marking</th>
			<td>All S355J2H EN 10210 Carbon Steel Seamless Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer&rsquo;s request.)</td>
		</tr>
		<tr>
			<th>Steel Grade S355j2h Application</th>
			<td>Oil Pipe &amp; Tube, Gas Pipe &amp; Tube, Fluid Pipe &amp; Tube, Boiler Pipe &amp; Tube, Heat exchanger Tube</td>
		</tr>
		<tr>
			<th>Carbon Steel S355J2H Value Added Service</th>
			<td>Draw &amp; Expansion as per required Size &amp; Length, Polish (Electro &amp; Commercial) Annealed &amp; Pickled Bending, Machining Etc.</td>
		</tr>
		<tr>
			<th>Carbon Steel S355j2h En 10210-1 Specialize in</th>
			<td>
			<ul>
				<li>En10210 S355j2h Circular Hollow Large Diameter Pipe</li>
				<li>En 10210 S355j2h Hot Rolling Capillary Tube</li>
				<li>S355j2h En 10210 Hot Finished Heat Exchanger &amp;</li>
				<li>En 10210-1 S355j2h Condenser Tube</li>
			</ul>
			</td>
		</tr>
		<tr>
			<th>Material Test Certificates (MTC)</th>
			<td>Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report,<br />
			Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts,<br />
			Bs En 10210 S355j2h Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP)</td>
		</tr>
		<tr>
			<th>Manufacturers of Steel Grade S355j2h Pipe</th>
			<td>
			<ul>
				<li>Kobe Special Tube, Japan</li>
				<li>Sumitomo Metals, Japan</li>
				<li>Nippon Steel Corporation, Japan</li>
				<li>Sanyo Special Steel, Japan</li>
				<li>Tubacex Tubos Inoxidables S.A., Spain</li>
				<li>Schoeller Bleckmann, Austria</li>
				<li>Seah Steel Corporation, Korea</li>
			</ul>
			</td>
		</tr>
	</tbody>
</table>

<div class="cmTitle">Chemical Composition of EN 10210 S355J2H Material</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th><strong>Grade</strong></th>
			<th><strong>C</strong></th>
			<th><strong>Si</strong></th>
			<th><strong>Mn</strong></th>
			<th><strong>P</strong></th>
			<th><strong>S</strong></th>
		</tr>
		<tr>
			<td>S355J2H (1.0576)</td>
			<td>max 0.22</td>
			<td>max 0.55</td>
			<td>max 1.6</td>
			<td>max 0.03</td>
			<td>max 0.03</td>
		</tr>
	</tbody>
</table>

<div class="cmTitle">EN 10210 S355J2H Mechanical Properties</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th>Specification</th>
			<td>EN10210 S355J2H</td>
		</tr>
		<tr>
			<th>Tensile Strength Rm&nbsp;N/mm2: 3 &le; T &le; 100mm</th>
			<td>470 &ndash; 630</td>
		</tr>
		<tr>
			<th>S355j2h Yield Strength ReH&nbsp;Min, N/mm2: T &le; 16mm</th>
			<td>355</td>
		</tr>
		<tr>
			<th>Min Elongation % T &le; 40mm on gauge length 5.65. &radic;S0</th>
			<td>22</td>
		</tr>
		<tr>
			<th>Impact properties Minimum Ave energy (J) at -20&deg;C</th>
			<td>27</td>
		</tr>
	</tbody>
</table>

<div class="cmTitle">Dimensional Tolerances of EN 10210 Grade S335J2H Pipes</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th><strong>Execution</strong></th>
			<th><strong>Size Range</strong></th>
			<th><strong>OD Tolerance</strong></th>
			<th><strong>Wall tolerance</strong></th>
		</tr>
		<tr>
			<td>Hot-rolled Tube</td>
			<td>OD &ndash; 80 mmOD &gt; 80 mmWall &lt; 12 mmWall - 12 mm</td>
			<td>&plusmn; 0.4 mm&plusmn; 0.5 % of OD</td>
			<td>&plusmn; 0.7 mm&plusmn; (5 % x wallthickness + 0.1 mm</td>
		</tr>
		<tr>
			<td>Hot-rolled peeled tube</td>
			<td>All sizesWall &lt; 12 mmWall - 12 mm</td>
			<td>+ 0.25/- 0 mm</td>
			<td>&plusmn; 0.8 mm&plusmn; (5 % x wall thickness+ 0.2 mm)</td>
		</tr>
		<tr>
			<td>Cold Worked tubecold-rolled or cold-drawn</td>
			<td>OD &lt; 40 mmOD 40 - 80 mmOD &gt; 80 Wall Thickness&lt; 6 mm Wall Thickness6 - 8 mm Wall Thickness &gt; 8</td>
			<td>+ 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm*</td>
			<td>&plusmn; 0.30 mm&plusmn; 0.35 mm&plusmn; 0.40 mm</td>
		</tr>
	</tbody>
</table>

<div class="cmTitle">Standard Length Tolerances</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th><strong>Component length (mm)</strong></th>
			<th><strong>OD 30-100 mm</strong></th>
			<th><strong>OD 100-254 mm</strong></th>
		</tr>
		<tr>
			<td>10-100</td>
			<td>+ 1.0/- 0</td>
			<td>+ 2.0/- 0</td>
		</tr>
		<tr>
			<td>100-600</td>
			<td>+ 2.0/- 0</td>
			<td>+ 3.0/- 0</td>
		</tr>
		<tr>
			<td>600-1200</td>
			<td>+ 3.0/- 0</td>
			<td>+ 4.0/- 0</td>
		</tr>
		<tr>
			<td>1200-5000</td>
			<td>+ 5.0/- 0</td>
			<td>+ 6.0/- 0</td>
		</tr>
	</tbody>
</table>

<div class="cmTitle">Hot Forming/ Heat Treatment</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th colspan="2">Hot Forming</th>
			<th colspan="3">Heat Treatment</th>
		</tr>
		<tr>
			<th>Temperature&deg;C</th>
			<th>Cooling Type</th>
			<th>Normalizing&nbsp;1&Prime;</th>
			<th>Stress relieving anneal&nbsp;2&Prime;</th>
			<th>Cooling Type</th>
		</tr>
		<tr>
			<td>&nbsp;700-750</td>
			<td>Air</td>
			<td>850-950&deg;C</td>
			<td>580-630&deg;C</td>
			<td>Air</td>
		</tr>
	</tbody>
</table>

<div class="cmTitle">EN10210 S355J2H&nbsp;Seamless Pipe Sizes</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th>1/8&quot; IPS(.405&quot; O.D.)</th>
			<th>3 1/2&quot; IPS( 4.000&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 40, 80</td>
			<td>SCH 10, 40, 80, 160, XXH</td>
		</tr>
		<tr>
			<th>1/4&quot; IPS(.540&quot; O.D.)</th>
			<th>4&quot; IPS(4.500&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 10, 40, 80</td>
			<td>SCH 10, 40, 80, 160, XXH</td>
		</tr>
		<tr>
			<th>3/8&quot; IPS(.675&quot; O.D.)</th>
			<th>5&quot; IPS( 5.563&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 10, 40, 80</td>
			<td>SCH 10, 40, 80, 160, XXH</td>
		</tr>
		<tr>
			<th>1/2&quot; IPS(.840&quot; O.D.)</th>
			<th>6&quot; IPS(6.625&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 5, 10, 40, 80, 160, XXH</td>
			<td>SCH 5, 10, 40, 80, 120, 160, XXH</td>
		</tr>
		<tr>
			<th>3/4&quot; IPS(1.050&quot; O.D.)</th>
			<th>8 &rdquo; IPS(8.625&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 10, 40, 80, 160, XXH</td>
			<td>SCH 5, 10, 40, 80, 120, 160, XXH</td>
		</tr>
		<tr>
			<th>1&quot; IPS:(1.315&prime; O.D.)</th>
			<th>10&quot; IPS(10.750&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 5, 10, 40, 80, 160, XXH</td>
			<td>SCH 10, 20, 40, 80 (.500), TRUE 80(.500)</td>
		</tr>
		<tr>
			<th>1-1/4&quot; IPS(1.660&quot; O.D.)</th>
			<th>12&quot; IPS(12.750&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 10, 40, 80, 160, XXH</td>
			<td>SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)</td>
		</tr>
		<tr>
			<th>1-1/2&quot; IPS(1.900&quot; O.D.)</th>
			<th>14&quot; IPS(14.000&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 10, 40, 80, 160, XXH</td>
			<td>SCH10 (.188), SCH40 (.375)</td>
		</tr>
		<tr>
			<th>2&quot; IPS(2.375&quot; O.D.)</th>
			<th>16&quot; IPS(16.000&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 10, 40, 80, 160, XXH</td>
			<td>SCH10(.188), SCH40(.375)</td>
		</tr>
		<tr>
			<th>2 1/2&quot; IPS(2.875&quot; O.D.)</th>
			<th>18&quot; IPS (18.000&quot; O.D.)</th>
		</tr>
		<tr>
			<td>SCH 10, 40, 80, 160, XXH</td>
			<td>SCH-40 (.375)</td>
		</tr>
		<tr>
			<th>3&quot; IPS( 3.500&quot; O.D.)</th>
			<th>&nbsp;</th>
		</tr>
		<tr>
			<td>SCH 5, 10, 40, 80, 160, XXH</td>
			<td>&nbsp;</td>
		</tr>
	</tbody>
</table>

<div class="cmTitle">S355J2H Carbon Steel Tube Sizes</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th>Wall</th>
			<th>Sizes ( O.D.)</th>
		</tr>
		<tr>
			<td>.010</td>
			<td>1/16&quot; , 1/8&quot; , 3/16&quot;</td>
		</tr>
		<tr>
			<td>.020</td>
			<td>1/16&quot; , 1/8&quot; , 3/16&quot; , 1/4&quot; , 5/16&quot; , 3/8&quot;</td>
		</tr>
		<tr>
			<td>.012</td>
			<td>1/8&quot;</td>
		</tr>
		<tr>
			<td>.016</td>
			<td>1/8&quot; , 3/16&quot;</td>
		</tr>
		<tr>
			<td>.028</td>
			<td>1/8&quot; , 3/16&quot; , 1/4&quot; , 5/16&quot; , 3/8&quot; , 1/2&quot; , 3/4&quot; , 1&quot; , 1 1/2&quot; , 2&quot;</td>
		</tr>
		<tr>
			<td>.035</td>
			<td>1/8&quot; , 3/16&quot; , 1/4&quot; , 5/16&quot; , 3/8&quot; , 7/16&quot; , 1/2&quot; , 16&quot; , 5/8&quot; , 3/4&quot; , 7/8&quot; , 1&quot; , 1 1/4&quot; , 1 1/2&quot; , 1 5/8&quot; , 2&quot; , 2 1/4&quot;</td>
		</tr>
		<tr>
			<td>.049</td>
			<td>3/16&quot; , 1/4&quot; , 5/16&quot; , 3/8&quot; , 1/2&quot; , 16&quot; , 5/8&quot; , 3/4&quot; , 7/8&quot; , 1&quot; , 1 1/8&quot; , 1 1/4&quot; , 1 1/2&quot; , 1 5/8&quot; , 2&quot; , 2 1/4&quot;</td>
		</tr>
		<tr>
			<td>.065</td>
			<td>1/4&quot; , 5/16&quot; , 3/8&quot; , 1/2&quot; , 16&quot; , 5/8&quot; , 3/4&quot; , 7/8&quot; , 1&quot; , 1 1/4&quot; , 1 1/2&quot; , 1 5/8&quot; , 1 3/4&quot; , 2&quot; , 2 1/2&quot; , 3&quot;</td>
		</tr>
		<tr>
			<td>.083</td>
			<td>1/4&quot; , 3/8&quot; , 1/2&quot; , 5/8&quot; , 3/4&quot; , 7/8&quot; , 1&quot; , 1 1/4&quot; , 1 1/2&quot; , 1 5/8&quot; , 1 7/8&quot; , 2&quot; , 2 1/2&quot; ,3&quot;</td>
		</tr>
		<tr>
			<td>.095</td>
			<td>1/2&quot; , 5/8&quot; , 1&quot; , 1 1/4&quot; , 1 1/2&quot; , 2&quot;</td>
		</tr>
		<tr>
			<td>.109</td>
			<td>1/2&quot; , 3/4&quot; , 1&quot; , 1 1/4&quot; , 1 1/2&quot; , 2&quot;</td>
		</tr>
		<tr>
			<td>.120</td>
			<td>1/2&quot; , 5/8&quot; , 3/4&quot; , 7/8&quot; , 1&quot; , 1 1/4&quot; , 1 1/2&quot; , 2&quot; , 2 1/4&quot; , 2 1/2&quot; , 3&quot;</td>
		</tr>
		<tr>
			<td>.125</td>
			<td>3/4&quot; , 1&quot; , 1 1/4&quot; , 1 1/2&quot; , 2&quot; , 3&quot; , 3 1/4&quot;</td>
		</tr>
		<tr>
			<td>.134</td>
			<td>1&quot;</td>
		</tr>
		<tr>
			<td>.250</td>
			<td>3&quot;</td>
		</tr>
		<tr>
			<td>.375</td>
			<td>3 1/2&quot;</td>
		</tr>
	</tbody>
</table>

<div class="cmTitle">EN 10210-1 S355J2H Material Price List</div>

<table style="width:100%">
	<tbody>
		<tr>
			<th colspan="1">En 10210 S355j2h Steel Pipe Price Per Piece in India</th>
			<th>Carbon Steel S355J2H Pipe Price in INR</th>
			<th>EN 10210-1 Grade S355J2H Carbon Steel Pipe Price in Saudi Riyal</th>
			<th>Carbon Steel S355j2h En 10210 Pipe Price in UAE Dirham</th>
		</tr>
		<tr>
			<td colspan="1">SEAMLESS HOLLOW SECTIONS GRADE:EN10210-1/2 S355J2H HOT ROLLED RHS SIZE IN MM:-300.00X200.00X16.00 THKX1115MM LENGTH Price in India</td>
			<td>Rs.112</td>
			<td>Saudi Riyal 5.94</td>
			<td>UAE Dirham 29.96</td>
		</tr>
		<tr>
			<td>PIPE CARBON STEEL PER EN 10210-1 STEEL S355J2H SIZE: OD 508MM Price in India</td>
			<td>Rs.11,107</td>
			<td>Saudi Riyal 588.97</td>
			<td>UAE Dirham 576.84</td>
		</tr>
		<tr>
			<td>HOLLOW SECTIONS (EN10210-1+ 2) S355J2H 70x40x4MM (2284.80MTR)IPC3.1-EN10204 - PARTS FOR TOWER CRANE PRODUCTION Price List</td>
			<td>Rs.75</td>
			<td>Saudi Riyal 3.98</td>
			<td>UAE Dirham 3.90</td>
		</tr>
		<tr>
			<td>CARBON STEEL TUBES SEAMLESS ACC.TO EN 10210-1 -SIN00473 0 028 FOR MANUFACTURING OF RAILWAY BRAKE / DOOR Cost in Mumbai</td>
			<td>Rs.13,300</td>
			<td>Saudi Riyal 705.26</td>
			<td>UAE Dirham 690.73</td>
		</tr>
		<tr>
			<td>Price of HOLLOW SECTION HOT FINISHED EN 10210-1+2 S355J2H 90X50 X5 MMIPC 3.1 EN 10204 LENGTH OF 7.25M (14 PCS) in Mumbai</td>
			<td>Rs.97</td>
			<td>Saudi Riyal 5.14</td>
			<td>UAE Dirham 5.04</td>
		</tr>
		<tr>
			<td>STEEL TUBES, HEAVY WALL, SMLS 508,00 X 36,00 MM LPC 3.1-EN 10204 E355 P355N S355J2H EN 10210-1 EN 10216-3 EN 10297-1 LEN Price in India</td>
			<td>Rs.112</td>
			<td>Saudi Riyal 5.94</td>
			<td>UAE Dirham 5.82</td>
		</tr>
	</tbody>
</table>
