<p><strong>Advantages of LED street lights</strong></p>

<ul>
	<li><strong>Low energy consumption: Many LED lighting retrofits have been claimed to dramatically reduce energy use, but in actual case studies lower energy use is limited and tied to reduced illumination levels[12]</strong></li>
	<li><strong>Long and predictable lifetime: The projected lifetime of LED street lights is usually 10 to 15 years, two to four times the life of currently prevalent HPS. (LEDs themselves do not generally fail or &quot;burn out&quot; in a way comparable to other technologies, and barring catastrophic failure of other mechanical or electronic components of the LED fixture, lifetimes are typically set by a decrease in luminous output of 30%.</strong></li>
	<li><strong>More accurate color rendering: The color rendering index is the ability of a light source to correctly reproduce the colors of the objects in comparison to an ideal light source. Improved color rendering makes it easier for drivers to recognize objects.</strong></li>
	<li><strong>Quick turn on and off: Unlike fluorescent and high-intensity discharge (HID) lamps, such as mercury vapor, metal halide, and sodium vapor lamps, which take time to heat up once switched on, LEDs come on with full brightness instantly.</strong></li>
	<li><strong>Immediate restart: Unlike mercury vapor, metal halide and sodium vapor lamps (commonly used in street lighting), LEDs do not have a problem restarting immediately (hot ignition) following a brief power failure or inadvertent turn off.</strong></li>
	<li><strong>RoHS compliance: LEDs don&#39;t contain mercury or lead, and don&#39;t release poisonous gases if damaged.</strong></li>
	<li><strong>Less attractive to nocturnal insects: Nocturnal insects are attracted to ultraviolet light emitted by many conventional light sources.</strong></li>
	<li><strong>Optically efficient lighting equipment: Other types of street lights use a reflector to capture the light emitted upwards from the lamp. Even under the best of conditions, the reflector absorbs some of the light. Also for fluorescent lamps and other lamps with phosphor coated bulbs, the bulb itself absorbs some of the light directed back down by the reflector. The glass cover, called a refractor, helps project the light down on the street in a desired pattern but some light is wasted by being directed up to the sky (light pollution). LED lamp assemblies (panels) can send light in the desired directions without a reflector.</strong></li>
	<li><strong>Reduced glare: Directing the light downward onto the roadway reduces the amount of light that is directed into driver&#39;s eyes.</strong></li>
	<li><strong>Higher light output even at low temperatures: While fluorescent lights are comparably energy efficient, on average they tend to have lesser light output at winter temperatures.</strong></li>
</ul>