<table>
	<tbody>
		<tr>
			<td>Material</td>
			<td>EN41B</td>
		</tr>
		<tr>
			<td>Size</td>
			<td>36-120mm</td>
		</tr>
		<tr>
			<td>Brand</td>
			<td>HIKON</td>
		</tr>
		<tr>
			<td>Finish</td>
			<td>Chromed</td>
		</tr>
		<tr>
			<td>Thread Type</td>
			<td>Designed</td>
		</tr>
		<tr>
			<td>Usage/Application</td>
			<td>Moulding</td>
		</tr>
		<tr>
			<td>Screw Type</td>
			<td>Single</td>
		</tr>
		<tr>
			<td>Appliance</td>
			<td>PP/PE/PS/Nylon/Deralin</td>
		</tr>
		<tr>
			<td>Diameter</td>
			<td>35-120mm</td>
		</tr>
		<tr>
			<td>Quantity Per Pack</td>
			<td>1</td>
		</tr>
		<tr>
			<td>Length</td>
			<td>As per designed</td>
		</tr>
		<tr>
			<td>Coated</td>
			<td>yes</td>
		</tr>
		<tr>
			<td>Finishing</td>
			<td>chromed finish</td>
		</tr>
		<tr>
			<td>Grade</td>
			<td>EN41B</td>
		</tr>
	</tbody>
</table>

<p><strong>Advantage</strong>&nbsp;<strong>:-&nbsp;</strong></p>

<ul>
	<li>Highest throughput in the industry</li>
	<li>Low melt temperature</li>
	<li>Highest efficiency of any screw design</li>
	<li>Melt quality can be controlled by varying the barrier gap</li>
	<li>Less back pressure required</li>
</ul>

<p><strong>Product Description</strong>&nbsp;<strong>:-&nbsp;</strong></p>

<ul>
	<li>Extruder barrel screw</li>
	<li>Diameter: &Iuml;&dagger;15-&Iuml;&dagger;300</li>
	<li>Length-diameter ratio: L/D=15-46</li>
	<li>Injection molding machine melt glue tubing (barrel) screw specifications:</li>
	<li>Mould clamp force: 250t-3200t</li>
	<li>Injection amount: 30g-2500g</li>
	<li>Technology index:</li>
	<li>Nitriding layer: 0.5-0.8mm</li>
	<li>Nitriding hardness: &iuml;&frac14; 950HV</li>
	<li>Nitriding brittleness: &iuml;&frac14;&oelig; level 2</li>
	<li>Linearity: 0.015mm/m</li>
	<li>Surface roughness: Rao 0.4/m</li>
</ul>
